CAUTION: Before you begin the following procedure, follow the safety instructions in the Product
Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically
touching an unpainted metal surface (such as the back panel) on the computer.
NOTICE: To help prevent damage to the system board, remove the main battery (see Before Working Inside
Your Computer) before working inside the computer.
NOTICE: Handle the speakers with care to help prevent damage to them.
Disconnect the speaker cable connector from the system board and remove the M2.5 x 5-mm
screw from the speaker assembly.
1
M2.5 x 5-mm screw
2
speaker cable connector
3
speaker assembly
Remove the speaker assembly.
Replacing the Speaker Assembly
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information
Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically
touching an unpainted metal surface (such as the back panel) on the computer.
NOTICE: To help prevent damage to the system board, remove the main battery (see Before Working Inside Your
Computer) before working inside the computer.
Align the speaker assembly on the screw holes for securing the assembly to the computer base.
Replace the M2.5 x 5-mm screw that secures the speaker assembly in place.