Reads and writes data in each CD-ROM, CD-ROM-XA, CD-I FMV, VIDEO CD and
CD-EXTRA.
Reads data in Photo CD(Single and Multi-session).
Reads and writes standard CD-DA.
Reads and writes CD-R discs conforming to "Orange Book Part 2."
Reads and writes CD-RW discs conforming to "Orange Book Part 3."
1. Continuously monitors the signal level during
recording and adjusts the laser power to compensate when the disc is dirty,
insuring a flat signal.
Important Precautions
Precautions
Please take notice that the manufacturer of this equipment does not offer any
warranty against data loss due to inappropriate installation or handling, or
direct or indirect damages.
Please take notice that the manufacturer will bear no responsibility for direct
or indirect damages caused by the use of this product or its malfunction.
Please take notice that the manufacturer will bear no responsibility for damage
to data caused by this product.
Please backup (copy) all important data as protection against data loss.
WARNING: Only drives (such as the HLDS GCC-4240N) bearing the
logo "Compact Disc ReWritable High Speed" can write or erase High-Speed CD-RW
media.
High Speed CD-RW Media may be recognized by the same "Compact Disc
ReWritable High Speed" logo on the disc label or packaging material, or by the
fact that it lists recording speeds of "4X to 10X," or, "Up to 10X."
Writing and erasing to High Speed CD-RW media include but is not limited
to the following user operations:
1) File drag and drop to High Speed CD-RW media via Adaptec DirectCD. 2) File copy to High Speed CD-RW media via Adaptec DirectCD. 3) Any other file/data transfer to High Speed CD-RW media via Adaptec
DirectCD.
Attempted writes to High Speed CD-RW media using CD-RW drives NOT bearing the logo "Compact Disc ReWritable High Speed" may result in data loss.
Installation
Avoid placing the drive in a location subject to:
high humidity
high temperature
excessive dust
mechanical vibration
direct sunlight
We recommend using the drive in a horizontal position.
Operation
Don't move the drive suddenly from a cold place to a warm one or raise the room
temperature suddenly. Condensation may occur, causing abnormal operation.
Make sure to remove the disc before moving the drive. The disc may be damaged,
causing data loss.
Be careful to prevent foreign objects, such as liquids or metal, from entering
the drive.
Don't interrupt the electric power while the drive is operating.