User Guide

12.1-Inch Display-Assembly Interface Cable: Dell™ Latitude™ CP and CPi

To remove the display-assembly interface cable, follow these steps:

1. Remove the display assembly.
2. Remove the LCD panel.
3. Disconnect the display-assembly interface cable from ZIF connector J1 on the LCD inverter board.
4. Remove the (2) 5-mm screws securing the left hinge, and then remove the hinge from the display-assembly top cover.
5. Lift the display-assembly interface cable out of the display-assembly top cover.

NOTE: When replacing the display assembly, reinstall the screws securing the left hinge at the locations marked on the hinge by arrows. Ensure that the display-assembly interface cable wraps once around the plastic bobbin before connecting the cable to the system board.