|
 | | | |
Preface: Dell PowerEdge 2500 and 2500SC Systems Service Manual
Back to Contents Page
Preface: Dell™ PowerEdge™ 2500 and 2500SC Systems Service Manual
A prerequisite for using this manual to service Dell computer
systems is a basic knowledge of IBM®-compatible PCs and prior training in IBM-compatible
PC troubleshooting techniques. In addition to information provided in this manual and in
the User's Guide that came with the system, Dell provides the Installation
and Troubleshooting Guide for troubleshooting procedures and instructions on using
Dell Diagnostics to test the computer system.
The sections are summarized as follows:
- "System Overview" — Overview
of the system's service features and technical specifications.
- "Basic Troubleshooting" —
Initial checks and procedures used to solve basic system problems and information on more
detailed service and troubleshooting procedures to solve more complex problems.
- "Codes and Error Messages" —
POST beep codes, system messages, system codes, warning messages,
diagnostics messages, alert log messages, and SCSI
hard-disk drive indicator codes.
- "Removing and Replacing Parts"
— Removal and replacement of all field-replaceable parts, including memory modules,
microprocessors, expansion cards, and SCSI devices.
- "Jumpers and Connectors"
— Jumper settings to change when servicing the system.
- "Using the System Setup Program"
— The System Setup program is used to change the system configuration information
stored in NVRAM on the system board.
Back to Contents Page
|
|
|