CAUTION: Before working inside your Dell computer, follow the safety instructions in your Product
Information Guide.
CAUTION: To prevent static damage to components inside your computer, discharge static electricity from
your body before you touch any of your computer's electronic components. You can do so by touching an
unpainted metal surface.
Remove the three screws at the top of the keyboard.
NOTICE: The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be
careful when removing and handling the keyboard.
Rotate the keyboard forward and lay it on the palm rest to allow access to the keyboard connector
on the system board.
Pull up on the pull-tab to disconnect the keyboard cable connector from the keyboard connector
on the system board.
1
keyboard
2
keyboard screws
3
keyboard cable connector
4
keyboard connector
NOTICE: To avoid scratching the palm rest when replacing the keyboard, hook the tabs along the front edge of the
keyboard into the palm rest, and then secure the keyboard in place.
To replace the keyboard, connect the keyboard cable connector to the keyboard connector on the
system board.
Place the tabs along the front edge of the keyboard into the palm rest and lay the keyboard down on
the palm rest.
Replace the three screws at the top of the keyboard.