User Guide

User Guide
Coin-Cell Battery: Dell Latitude D810 Service Manual

Back to Contents Page

Coin-Cell Battery

Dell™ Latitude™ D810 Service Manual

  Removing the Coin-Cell Battery



Removing the Coin-Cell Battery

CAUTION: Before working inside your computer, read the safety instructions in your Product Information Guide.
  1. Follow the instructions in "Preparing to Work Inside the Computer."

  2. Remove the access door beneath the main battery.

  3. Slide the coin-cell battery out of the tabs that hold it in place.

  4. Grasp the coin-cell battery connector cable and disconnect it from the coin-cell battery socket.

1

connector cable

2

coin-cell battery

NOTE: The coin-cell battery connector and socket can only connect in one configuration. If you encounter resistance, check the configuration and try again.
  1. To connect the new coin-cell battery to the socket:

    1. Slide the coin-cell battery under the tabs that hold it in place.

    1. Reattach the access door and gently press down on the latch until you feel a click.

    2. Reinsert the main battery.


Back to Contents Page

 

© 2009 Dell | About Dell | Terms of Sale | Unresolved Issues | Privacy | Site Map | | Feedback

snWEB3