User Guide

User Guide
Internal Card With Bluetooth® Wireless Technology: Dell Latitude D420 Service Manual

Back to Contents Page

Internal Card With Bluetooth® Wireless Technology

Dell™ Latitude™ D420 Service Manual


CAUTION: Before performing the following procedures, read the safety instructions in your Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of the computer.
NOTICE: To prevent damage to the system board, remove the main battery before you service the computer.

If you ordered an internal card with Bluetooth wireless technology with your computer, it is already installed.

  1. Follow the procedures in Before You Begin.

  2. Remove the hinge cover (see Hinge Cover).

  3. Remove the keyboard (see Keyboard).

  4. Remove the M2 x 3-mm screw from the card holder and lay the holder aside.

  5. Lift the card away from the aligning pin.

  6. Disconnect the card cable connector from the card.

1

internal card with Bluetooth wireless technology

2

card cable connector

3

M2 x 3-mm screw

4

card holder

5

aligning pin

 

 

NOTICE: Be careful when removing the card to avoid damaging the card, card cable, or surrounding components.

Back to Contents Page

 

© 2009 Dell | About Dell | Terms of Sale | Unresolved Issues | Privacy | Site Map | | Feedback

snWEB3