手册

Fan: Dell Latitude C840 Service Manual

Back to Contents Page

Fan

Dell™ Latitude™ C840 Service Manual

NOTICE: Disconnect the computer and attached devices from electrical outlets and remove any installed batteries.

NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by periodically touching unpainted metal on the computer.

1

fan cables

2

M2 x 4-mm screws (3)

Removing the Fan

Follow the instructions in "Preparing to Work Inside the Computer."
Remove the system board.
Remove the three M2 x 4-mm screws from the fan.
Disconnect the two fan cables from the system board.
Pull the fan away from the back-panel bracket.

NOTICE: When reconnecting the fan cables, connect the shorter cable to the connector closest to the fan. Route both cables so that they will not be pinched by the microprocessor thermal-cooling assembly.

Back to Contents Page