Save and close any open files, exit any open programs, and shut down
the computer.
NOTICE: Disconnect the computer and any attached devices from electrical
outlets, and remove any installed batteries.
NOTICE: The hard drive is very sensitive to shock. Handle the hard drive by
its edges (do not squeeze the top of the hard drive case), and avoid dropping it.
NOTICE: To prevent data loss, turn off your computer before removing the
hard drive. Do not remove the hard drive while the computer is running, in
standby mode, or in hibernate mode.
CAUTION: If you remove the hard drive from the computer when the drive is hot, do not touch the metal housing of the hard drive.
Ground yourself by touching a metal connector on the back of the
computer.
Turn the computer over. Remove the M3 x 5-mm screw from the hard
drive door.
Hard Drive Removal
1
bottom of computer
2
M3 x 5-mm screw
3
hard drive door
Lift up the hard drive door until you hear a click.
NOTICE: Use firm and even pressure to slide the hard drive into place. If you
force the hard drive into place using excessive force, you may damage the
connector.
Lift up the hard drive door until you hear a click. Push the hard drive
into the drive bay until it is fully seated in the bay.
Press the hard drive door down.
Replace the M3 x 5-mm screw in the hard drive door.
