NOTE: If you ordered the optional modem at the same time that you ordered your computer, the
modem is already installed.
Removing the Modem
CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically
touching an unpainted metal surface, such as the back panel on the computer.
Loosen the two captive screws on the modem/Mini-Card/wireless cover, then remove the cover and set
it aside.
1
modem/Mini-Card/wireless cover
2
captive screws (2)
Remove the M2 x 3-mm screw securing the modem to the system board and set it aside.
Pull straight up on the attached pull-tab to disconnect the modem from the connector on the system
board.
Disconnect the modem cable from the modem.
1
modem
2
modem cable
3
M2 x 3-mm screw
4
system board connector
5
pull tab
Replacing the Modem
CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product
Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically
touching an unpainted metal surface, such as the back panel on the computer.
