Specifications: Dell PowerVault 120T DLT1 User's Guide
Back
to Contents Page
Specifications: Dell PowerVault 120T DLT1 Autoloader
User's Guide
This section contains specification information about
the PowerVault 120T DLT1 and the DLT1 drive.
Table 1. Drive Specifications
| Type: |
Dell PowerVault 120T DLT1 with DLT1
drive (Benchmark® Tape System model DLT1) |
Data Capacity:
(compressed mode) |
Up to 80 GB per 1800 ft cartridge |
Data Transfer Rate:
(compressed mode) |
6.0 MB/sec. sustained (360 MB/min.) |
Table 2. Loader Specifications
| Media type: |
DLT ½-inch, metal-particle cartridges |
| Capacity: |
Up to 560 GB |
| Cartridge Change: |
10 seconds maximum |
| Indicators/Controls: |
4 button keypad with LCD menu display,
Power button, Power LED, Activity LED and Alarm LED to monitor and control
system status, diagnostics and configuration |
| Interface: |
Dell PowerVault 120T DLT1 with DLT1
drive -- SCSI-2, Fast/Wide, low voltage DIFF/SE, 68-pin HD |
Table 3. Reliability Specifications
| Maintenance: |
Drive head cleaning with DLT1 cleaning
cartridge when indicated by drive, or automatic with Autoclean enabled. |
| MSBF: |
Greater than 250,000 cartridge changes
(net, drive and media) with scheduled maintenance. |
| MTBF: |
More than 80,000 power-on hours |
| MTTR: |
Within 30 minutes |
Table 4. Physical Specifications
| Dimensions: |
9.25" (w) x 23.25" (d) x 7.5" (h) |
| Weight: |
26.5 lb. |
| Shipping Weight: |
37 LB |
Table 5. Power Consumption
Specifications
| Power: |
Less than 85 Watts |
Table 6. Environment
Specifications
| Temperature: |
10° C to 40° C (Operating) |
| Humidity: |
5% to 80% RH, non-condensing (Operating)
90% maximum (Storage/Shipping) |
| Vibration: |
0.3 g (5 - 500 Hz), Operating Tested
per ISTA for storage/shipping |
| Shock: |
3 g Operating Impact tested per ISTA
for storage/shipping |
Table 7. FS-DLT1 Electrical
Specifications
| Electrical: |
100 - 240V~, 1.2 - 0.6A, 50/60 Hz |
Back
to Contents Page
|
