Installing and Configuring the Router for non-Ethernet Cable Connections
A cable modem may support only Ethernet connection, only USB connection, or
both types of connections.
Cable modem with only USB Connection
Your TrueMobile 1184 router is designed to function with only Ethernet
connection on its Broadband interface. If your cable modem supports only
USB connection, you need to replace it with a model with at least one Ethernet
connection.
Cable modem with both USB and Ethernet Connections
If your cable modem supports both USB and Ethernet connections, but is
connected to your computer via USB cable, follow the instructions below to
switch to the Ethernet connection.
Power down your cable modem.
Disconnect the USB cable from your computer and the cable modem.
Connect one end of an standard Ethernet cable into the Ethernet port of
the Ethernet card on your computer
Insert the other end of the cable into the Ethernet port on your cable
modem.
Power up the cable modem. The modem may need several minutes to
initialize.
Insert the TrueMobile 1184 CD into the CDROM drive on the computer to
start the Setup Wizard and select "Installation" and "Setup
First Computer" to begin the installation of the router.
