Setup Wizard is an easy-to-use program included
on your TrueMobile 1184 CD. It provides simplified configuration
procedures for establishing Internet connectivity on the Wireless Broadband Router.
The Setup Wizard first
extracts the connection settings from your active ISP connection on your PC with
Cable/DSL modem. It then displays a series of graphical illustrations on
how to connect the router to the network. Finally it applies the extracted
settings on your router and validate its installation. If the installation cannot be completed successfully,
the Setup Wizard will display troubleshooting instructions to guide you through the
installation process.
In addition, the Setup Wizard also provides links to the User's Guide on the
TrueMobile 1184 CD and also the Dell support website.
To run the setup wizard, complete the following steps.
Insert the TrueMobile 1184 Wireless Broadband Router Setup Wizard and User Guide CD
that came with the package into the CD-ROM
drive on your computer. Your CD should automatically launch the Setup
Wizard program. If it does not, complete the following steps
to start the Wizard.
a. On your computer, go to Start > Run.
b. Type x:\setup.exe (where "x" is the drive letter of your CD-ROM
drive)
Once the Setup Wizard has been launched, you
will be guided through a series of windows. These windows are illustrated
below along with an explanation on their functionalities.
Installation -- to begin installing your router and configure
computers for Internet connectivity.
User's Guide -- to allow you view the User's Guide ( this document).
Exit -- to end the Setup Wizard.
Installation > Setup your PC
After you select "Installation" from the main menu, the
figure below will display.
Click Setup First Computer if you want to install the router on a
computer that is used to connect to Internet with Cable or DSL modem.
Click Setup Additional Computer to connect additional computers to
the network after you have successfully install the router using the Setup
First Computer option.
Installation > Setup your PC > Setup First Computer
After you select "Setup First Computer" from the Set up
your PC, the first following figure will display.
Installation Overview
Display the general steps required for the configuration process.
Verify Internet Connection ...
Remind you to establish an active Internet connection before taking the
next step.
If you are using a PPPoE
connection, your computer will need to reboot. Click Next and
then click OK to reboot.
The first Setup Wizard window after reboot.
Connect the Wireless Broadband Router to your network
Illustrate how one connects the Cable or DSL modem to the router.
Illustrate how one connects the router to the PC
Illustrate how one connects the power supply to the router.
Configure the Wireless Broadband Router
Choose Yes if you have an AOL-DSL connection and you will not be prompted for a PPPoE username and password. Choose
No if you have other ISP DSL connections.
(Prompt for PPPoE user name and password -- displayed
only if you have a PPPoE connection)
Configure the Wireless Broadband Router
Setup Wizard will apply the Internet connection settings to your router after clicking Next.
Congratulations
You have successfully installed the router and configure the first PC for
Internet access.
This window explains the information on wireless settings and how to enhance the security of your router.
