手册

Specifications: Dell P793 Color Monitor User's Guide

Specifications: Dell� P793 Color Monitor User's Guide

General � CRT � Resolution � Preset Display Modes � Electrical � Physical Characteristics � Environmental � Power Management Modes � Pin Assignments � Plug and Play Capability

CRT(17")

Diamondtron

Screen dimensions

Preset Image Size

Diagonal 15.35 inches(390mm)

(This is the Dell recommended viewing image)

Horizontal 312 � 3 mm (12.28 � 0.12 inches)

Vertical 234 � 3 mm (9.20 � 0.12 inches)

Viewable Image Size (VIS)
(This is the maximum viewable image)

Diagonal 16.00 inches(40.6 mm) Max

AG Pitch

0.25 mm

Deflection angle

90�

Phosphor type

Medium-short persistence phosphor

Faceplate coating

Anti-reflection coating with anti-static properties

Resolution

Horizontal scan range

30 kHz to 96 kHz (automatic)

Vertical scan range

50 Hz to 160 Hz (automatic)

Optimal preset resolution

1024 x 768 at 85 Hz

Highest preset resolution

1600 x 1200 at 75 Hz

Dell guarantees image size and centering for all preset modes listed in the following table.

Preset Display Modes

Display Mode	Horizontal Frequency (kHz)	Vertical Frequency (Hz)	Pixel Clock (MHz)	Sync Polarity (Horizontal / Vertical)
IBM^�, VGA2, 720 x 400	31.469	70.087	28.322	-/+
IBM, VGA3, 640 x 480	31.469	59.940	25.175	-/-
VESA^�, 640 x 480	43.269	85.08	36.000	-/-
VESA, 800 x 600	53.674	85.061	56.250	+/+
VESA, 1024 x 768	60.023	75.029	78.750	+/+
VESA, 1024 x 768	68.677	84.997	94.500	+/+
VESA, 1280 x 1024	91.146	85.024	157.500	+/+
VESA, 1600 x 1200	93.75	75.00	202.500	+/+

Electrical

Video input signals

analog, 0.7 Vpp, positive at 75 ohm

Synchronization input signals

Separate horizontal and vertical;
TTL level, positive or negative
Composite sync. On the H sync line

AC input voltage / frequency / current

90 to 240 VAC / 50 or 60 Hz �3 Hz /
2.0 A (RMS) at 120 VAC and
1.0 A (RMS) at 220 VAC

Inrush current at 120 V

20 A

Inrush current at 240 V

35 A

Physical Characteristics

Connector type

15-pin D-subminiature

Signal cable type

attached to monitor

Dimensions:

Height (with base)

16.4 inch (417.4 mm)

Height (without base)

14.4 inch (363.0 mm)

Width

15.7 inch (398.0 mm)

Depth

16.9 inch (430.3 mm)

Weight (monitor only)

38.8 lb (17.6 kg)

Weight (with packaging)

44.97 lb (20.4 kg)

Environmental

Temperature:

Operating

10 � to 35 �C (50 � to 95 �F)

Non-operating

-20 � to 60 �C (-4 � to 140 �F)

Humidity:

Operating

20% to 80% (noncondensing)

Non-operating

5% to 95% (noncondensing)

Altitude:

Operating

3,000 m (10,000 ft)

Non-operating

15,000 m (50,000 ft)

Thermal dissipation

443 BTU/hour (maximum)
341 BTU/hour (typical)

Power Management Modes

If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If input from keyboard, mouse or other input devices is detected by the computer, it will automatically "wake up" the monitor. The following table shows the power consumption and signaling of this automatic power saving feature:

Power Management Definition
VESA's Mode	Video	H-sync	V-sync	Power Used	Power Saving (%)	LED color
ON	Active	Yes	Yes	Max 130W Typical 100W	0 %	Green
Active-OFF *	Blanked	No	No	Less than 5W	95 %	Green blanking
OFF				Less than 1.0W

This monitor is ENERGY STAR� compliant as well as TCO '99 and MPR II power management compatible.

* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.

ENERGY STAR� is a U.S. registered mark. As an ENERGY STAR� Partner, DELL has determined that this product meets the ENERGY STAR� guidelines for energy efficiency.

Pin Assignments

Pin Number 15-Pin Side of the Signal Cable

1 Video-Red

2 Video-Green

3 Video-Blue

4 GND

5 DDC-return

6 GND-R

7 GND-G

8 GND-B

9 5V

10 GND-sync/self-raster

11 GND

12 DDC data

13 H-sync

14 V-sync

15 DDC clock

Plug and Play Capability

You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. If desired, the user can select different settings, but in most cases monitor installation is automatic.

Back to Contents Page