|
Using the Speaker System: Altec Lansing ACS340 User's
Guide
Back to Contents
Page
Using the Speaker System: Altec Lansing ACS340
User's Guide
On/Off Switch.
The On/Off switch is located at the rear of the right satellite
speaker base. Press this switch in to turn the system on. A power
indicator on the front part of the right satellite speaker base will
glow to indicate power is on. Press the switch again to turn power
off.
Volume Control. Turn the Volume Control clockwise to increase overall
volume level. Turn counter-clockwise to decrease volume.
Bass Control.
The Bass Control adjusts the volume level of the low frequencies. To
increase Bass, turn the control clockwise. To decrease Bass, turn the
control counter-clockwise.
Treble Control. Treble frequencies are emitted from the satellite
speakers. To increase treble (high frequencies), turn the control
clockwise. To decrease treble, turn the control
counter-clockwise.
Headphone Jack. To listen privately, it is sometimes necessary to use
headphones. Once the headphone plug is inserted into the headphone
jack, the speakers are automatically disconnected.
 *Note: Headphones are not
included.
Figure 3.
Back to Contents
Page
| 