|
Connections: Altec Lansing Computer Speaker System ACS90
Connections: Altec Lansing Computer Speaker
System ACS90
- Insert the white speaker plug into the output jack
labeled "Spkr Out."
- Plug the green stereo audio cable into the jack labeled
"Input" on the satellite speaker and into the
non-amplified output of the sound card on the rear of the computer.
- Insert the AC power plug into a wall outlet, and press
the switch on the satellite.
An indicator on the front panel will glow
to show that power is on. Rotate the volume control
clockwise to a comfortable listening level.
 |
CAUTION: Do not connect the AC power
plug into the wall outlet until all connections
are made as shown in the Connections
illustration.
|
- A Sub output is provided in the event you want to add a
subwoofer to improve low-frequency audio response.
|
