User Guide

13.3-Inch Display Assembly Bezel: Dell™ Latitude™ CP and CPi

(12.1-inch display shown)

To remove the display assembly bezel, follow these steps:

1. Use a scribe to carefully pry the screw covers out of the 6 screw holes in the bezel.
2. Remove the 6 screws from the bezel.
   The 4 upper screws are 3-mm screws, while the lower 2 screws are 5-mm in length.
3. Separate the bezel from the display-assembly top cover. The bezel is secured by snaps along its lower edge, and hooks along its right and left edges.
   1. Insert your fingertips between the lower edge of the bezel and the LCD panel and lift upward on the bezel to release the hidden snaps.
   2. Lift the lower right corner of the bezel slightly, and then slide the bezel off of the display assembly until the hooks on the right and left edges release from the display-assembly top cover.