User Guide

Audio Board: Dell™ Latitude™ CP and CPi

To remove the audio board, follow these steps:

1. Remove the palmrest assembly.
2. Remove the 5-mm screw securing the audio board shield.
3. Remove the audio board shield.

CAUTION: The connectors for the speaker wires and microphone wires are fragile. Do not pull on the wires to disconnect them.

4. Disconnect the speaker wires and microphone wires from their connectors on the audio board.
5. Remove the audio board from the bottom case.

NOTE: When replacing the audio shield, ensure that the audio shield is properly seated to prevent it from cutting into the speaker wires or interfering with devices installed in the modular bay. (You can check this by temporarily installing a device in the modular bay prior to reinstalling the palmrest assembly.)