|
Technical Overview: Dell WebPC System Reference
Back to Contents Page
Technical Overview: Dell WebPC System Reference

| 1 |
CD-ROM/DVD-ROM
drive eject button |
| 2 |
CD-ROM/DVD-ROM
drive emergency eject hole |
| 3 |
Power/sleep
button |
| 4 |
Hard-disk
drive indicator |
| 5 |
Dell
E-support button |
| 6 |
Headphone
jack |

| 1 |
Modem
connector |
| 2 |
NIC
connector* |
| 3 |
Security
cable slot |
| 4 |
AC
power receptacle |
| 5 |
Voltage
selection switch |
| 6 |
Diagnostic
lights |
| 7 |
Microphone
jack |
| 8 |
Speaker
jack |
| 9 |
Optional
flat-panel display (DVI) connector |
| 10 |
Video
connector |
| 11 |
USB
port connectors (3) |
* Available only on computers with integrated network interface
controllers (NIC). Computers without NICs have telephone line connectors.

| 1 |
 |
Internet |
Connects you to the Internet,
depending on your ISP setup. The default home page is
http://www.dellnet.com. |
| 2 |
 |
Search |
Launches your default search
browser at the Dellnet Web site at http://dellnet.snap.com. |
| 3 |
 |
Mail |
Starts your e-mail program. The
default is Microsoft Outlook Express. |
| 4 |
 |
Sleep |
Activates sleep mode. |
| 5 |
 |
Volume Down |
Decreases the speaker volume. |
| 6 |
 |
Volume Up |
Increases the speaker volume. |
| 7 |
 |
Mute |
Mutes the speaker volume. |
| 8 |
|
Keyboard palmrest |
Provides wrist support while typing. |
| 9 |
|
USB port connectors (2) |
Enables use of other devices such as a
mouse and game controller. |
You can change the settings for the Internet, Search, and
Mail keys by using the
Hotkey Setup in the Windows Control Panel. To change these settings, perform
the following steps:
- Click the Start button, point to Settings, and
then click Control Panel.
- Double-click the Hotkey Setup icon and make the
desired changes for each key:
- Internet key To go to a different home page, change Internet
Browser.
- Search key To use a different Web search engine,
change Search Page.
- Mail key To use a different e-mail application
program, change the pathname under Email Reader.
- Click OK.
The new settings are active immediately.
Back to Contents Page
|