User Guide

Connections: Altec Lansing Computer Speaker System ACS90

1. Insert the white speaker plug into the output jack labeled "Spkr Out."
2. Plug the green stereo audio cable into the jack labeled "Input" on the satellite speaker and into the non-amplified output of the sound card on the rear of the computer.
3. Insert the AC power plug into a wall outlet, and press the switch on the satellite.
   An indicator on the front panel will glow to show that power is on. Rotate the volume control clockwise to a comfortable listening level.
   

   CAUTION: Do not connect the AC power plug into the wall outlet until all connections are made as shown in the Connections illustration.

4. A Sub output is provided in the event you want to add a subwoofer to improve low-frequency audio response.